MG OO XN Raiser Custom-Painted

  MG OO XN Raiser是在日本PB限定販售的機種，但在日本海外改成一般販售。基本上就是用原本的OO Raiser加上XN戰機的組合，貼紙部分追加XN Raiser使用的水貼，也有附上一顆LED，整體來說是款很超值的組合，只要再加上OO七劍，基本上就全備了。
  MG OO XN Raiser is limited on P-Bandai, but it can be found in general shop expcept Japan. Which including MG OO Raiser and new kit, XN unit. Also you can find a water decal for XN unit and one LED. You can purchase MG OO seven sword to make it into a full set Gundam OO.

  這次的製作只有進行藍色部分的改色，其餘部分並沒有重新塗裝。
  This time I only paint the blue parts into purple, and keep the other parts with original color.

光束劍和GN劍III的特效零件並沒有放在照片中
The effect parts of beam swords and GN sword III are not included in this picture.

O raiser 和XN組件合體後的XN raiser
XN raiser, which is combined by O raiser and XN unit.

本體加上O raiser
Gundam OO with O raiser.

本體和XN組件
Gundam OO with XN unit.

整個套件合體
Gundam OO XN Raiser

整個背部負重太重，用腳架會一直往後仰，也很難擺姿勢
The weight of back pack is too heavy, the action base cannot hold it. Also hard to make some postures.

HGBF Chinagguy 委員長千奈凱

  這次的作品呢～最近有點懶散，就只有簡單的素組補色和上貼紙...

  This time... I'm a little bit lazy, so I only complete by stickers and few painting.

  這款相對於早在幾年前出版的超級文奈，委員長的臉部表情柔和許多，也將關節造型做了較多的修飾，感覺在設計上比較像是以人為主體套上機械外裝，跟FAG系列較為接近也比較討喜，超級文奈則像是在機器人身上套上了人頭、手掌、腳掌。整體上如果只是想要體驗萬代版的少女人形兵器，千奈凱是較為推薦的一款。

  Compare with Super Fumina which is published few years ago, the facial of Chinagguy is more gentle. And also make cover on the joints. I think the basic concept of Chinagguy is a man with arms. It's more close to Frame Arms Girl. As Super Fumina just like a robot with man's head, palms and feet. If you just want to try one of the frame arms girl by Bandai, I think Chinagguy is a good choice.

  以盒繪為範本，委員長的補色貼紙會缺幾個部分，在小熊耳和大熊耳內側的白色。

  Taking the box art as the sample, you can finish most of it by stickers. You still need to paint on the bear ears parts.

照片裡少放了一個配件是全透明的眼鏡，可以透過貼紙或補色方式完成。圖中的眼鏡是只有紅色鏡架沒有鏡片的版本。
The glasses in the picture only has frame without lenses. There still one accessory not in the picture. Which is a clear glasses with lenses and can be completed with sticker or paint. 

UGEARS Mechanical Box

　　UGEARS出了一系列木材機械模型，主打就是自走、機械、免膠水的模型，有些是純粹的玩具，有些還有實用的功能。雖然號稱免膠水，但還是要其他工具喔! 這不像是鋼普拉這麼簡單，建議要至少要準備凡士林或其他潤滑劑，一把大一點的尖嘴鉗，以及大力金剛指才行，因為這個模型公差設計的滿剛好的，有些卡榫要用金剛指或是工具敲進去。
　　UGEARS has a series of wooden models. Self-propelled, mechanical and no glue needed are the main features of the series. Some are just toys but some model has useful function. It's not that easy as a Gunpla or other plastic models. You still need some tools like lubricant and a needle-nose pliers. Because the tolerance of the components maybe tight that need the tool for help.

很妙的是上面還有寫比例尺
It is also a scale model, not full size.

外包裝打開後裡面有三片框架，大概就盒子一半高度，底下是中空的喔
This model only has three frame.

框架正面
The front side of the frame.

框架背面，可以看到數字是反過來的
The rear side of the frame, you can see the numbers are reversed.

牙籤是齒輪的轉軸，大概只會用到一半，不用擔心用斷了沒有合適的備品
The toothpick is the shaft of the gear. These include the spare parts.

說明書是多語言的，但沒有中文在裡面...
The tutorial is multi-language, but there's no Chinese inside.

不過基本上圖解就足夠理解了，特別注意的是右下角的這個工具，可以從框架上找到，它包含了量測及推進牙籤的功能
The tool in the bottom right of this page, you can find it in one of the frame. It use for measurement and pushing the toothpick.

每頁開始都會告訴你要使用哪片框架和那些零件
It tells you which frame and components are going to be assembled on every pages.

還有注意要塗上潤滑劑的位置
And be aware of the gear position that need put some lubricant on.

他不像塑膠模型框架有流道，所以只能用推的，有時候零件剛好會裂開
It's not like plastic model has runner, so the only way is to push the component from the frame. Sometimes it may crack.

這是類似注料口的地方，建議齒輪處還是用筆刀修整
It's something like a gate, and better repair it.

牙籤裝進齒輪前建議都先推進這兩個圓形的小零件，讓牙籤前端稍微變形會比較好推進齒輪組裡面
Before pushing the toothpick into the gears, better use these two small and round components for shaping. It will easier for pushing it.

我是直接用尖嘴鉗壓
I use needle-nose pliers for shaping.

壓下左邊按鈕，就可以打開蓋子，放開後會自動復位
Press the left buttom, and the cover will be opened. Release it and the cover will turn back automaticlly.

下面連結的影片就是它動起來的樣子囉~

It's how it looks like.

Macross Frontier 超時空要塞F VF-27r

        超時空要塞系列的大比例(1/72)模型目前為止有Bandai及Hasegawa兩間廠商出版，B社的優點就是能夠完整重現兩段變形，H社一盒模型只能呈現一種型態，而且不見得每個型態都會出。兩間廠商都附了大量水貼以較少的零件量呈現完整的分色，VF-27r這款只有B社出品。

　　There's two vendors provide 1/72 Macross plastic model, Bandai and Hasegawa. Fully tranformation with three types is one of the advantage of Bandai. Hasegawa only do one type for each model, and not always publish three types. Both vendors provide water stickers with kits. 1/72 VF-27r only provide by Bandai.

　　基本上主體色有三種，為了減少色差和遮蓋時間，選噴了兩種主色，另一種用水貼取代。底層用灰色的底漆補土做表面檢查及統一底色，噴上黑色做陰影，接著直接噴上主色。組裝過程已經造成些微刮漆，所以完成後就沒有再拍攝變形型態。

　　Use grey primer in bottom then balck as pre-shadow. To reduce sparying time and cover time,  I spary two main color and use sticker for replacment of another main color. The paint film has damaged when assembly, so I don't take any pictures for transformer types.

Google Album : https://tinyurl.com/mhc4j5x

預置陰影
pre-shadow

GAIA遮蓋液不會咬底漆
GAIA masking coat don't damage paint film

順序是紫紅色->淺粉紅->深紅色水貼，左邊是貼上水貼之後
The sequence is fuchsia->light pink->dark violet sticker, left side is finished.

切開水貼留下需要的部分
Cut water sticker, right side is going to be used.

為這顆頭留個紀念，組完後就不會露出來了
Only picture of the robot type.