Macross Frontier 超時空要塞F VF-27r

        超時空要塞系列的大比例(1/72)模型目前為止有Bandai及Hasegawa兩間廠商出版，B社的優點就是能夠完整重現兩段變形，H社一盒模型只能呈現一種型態，而且不見得每個型態都會出。兩間廠商都附了大量水貼以較少的零件量呈現完整的分色，VF-27r這款只有B社出品。

　　There's two vendors provide 1/72 Macross plastic model, Bandai and Hasegawa. Fully tranformation with three types is one of the advantage of Bandai. Hasegawa only do one type for each model, and not always publish three types. Both vendors provide water stickers with kits. 1/72 VF-27r only provide by Bandai.

　　基本上主體色有三種，為了減少色差和遮蓋時間，選噴了兩種主色，另一種用水貼取代。底層用灰色的底漆補土做表面檢查及統一底色，噴上黑色做陰影，接著直接噴上主色。組裝過程已經造成些微刮漆，所以完成後就沒有再拍攝變形型態。

　　Use grey primer in bottom then balck as pre-shadow. To reduce sparying time and cover time,  I spary two main color and use sticker for replacment of another main color. The paint film has damaged when assembly, so I don't take any pictures for transformer types.

Google Album : https://tinyurl.com/mhc4j5x

預置陰影
pre-shadow

GAIA遮蓋液不會咬底漆
GAIA masking coat don't damage paint film

順序是紫紅色->淺粉紅->深紅色水貼，左邊是貼上水貼之後
The sequence is fuchsia->light pink->dark violet sticker, left side is finished.

切開水貼留下需要的部分
Cut water sticker, right side is going to be used.

為這顆頭留個紀念，組完後就不會露出來了
Only picture of the robot type.